Procedure - Activation of the LANcity cable modem
1. Pluging the cable modem with the coax cable.
- Look at the connector CABLE TV behind the cable modem.
- Plus the coax wire in the "CABLE TV" connector.
2. Pluging the computer with the cable modem.
- Plug the RJ-45 wire of your computer to the "ETHERNET (DATA)" connector behind the cable modem.
- Check that the other end of wire RJ45 is well connected with your network adapter of your computer.
3. Pluging the power of the cable modem.
- Plug the power cord in the power connector of the modem.
- Connect the other end of the power cord in a electric outlet.
4. Auto initialisation of the cable modem.
- Every light can be switched from on to off or still to flash to indicate an activity.
The light "power"
will go on and will flashing.
The light 
will go on and will flashing. If the modem don't find is condifuration on the server of COGECO, this light will not go on or will still flashing.
The light 
will flashing when download.
The light 
will flashing when upload.
Note : If the light don't go on or still flashing, unplug the power of the modem and replug it. If after some second the light don't stop flashing, call technical support of COGECO at 1-800-665-3131 or at (819) 693-3131 from Trois-Rivières.
Return to index
