Procedure - Activation of the Samsung cable modem
1. Pluging the cable modem câble with the coax cable.
- Look at the connector behind the cable modem.
- Plus the coax wire in the "RF" connector.
2. Pluging the computer with the cable modem.
- Plug the RJ-45 wire of your computer to the "ETHERNET" connector behind the cable modem.
- Vérifiez que l’autre extrémité du fil RJ45 soit bien branchée à la carte réseau de votre ordinateur.
Note : Check that the other end of wire RJ45 is well connected with your network adapter of your computer.
3. Pluging the power of the cable modem.
- Plug the power cord in "DC-5V" behind the cable modem. DC-5V.
- Connect the other end of the power cord in a electric outlet.
4. Auto initialisation of the cable modem.
- When the modem start to initialise, light will appear like this :
- Light " RECEIVE " will flashing slowly until <<foward>> signal are found..
- Light " SEND " Will flashing quickly until <<reverse>> signal are found.
- Light " SERVICE " will remain without flashing and the modem will take is configuration on the server of COGECO.
- When all light is ON, the modem is synchronised.
Note: If <<SERVICE>> light don't go ON, contact the technical support of COGECO at 1-800-665-3131 ou at (819) 693-3131 from Trois-Rivières.
Return to index
